Position innerhalb des Seitenbaumes

Institut für Leistungselektronik und Elektrische Antriebe
Institut
Team
Marx, M.Sc., Philipp

Philipp Marx, M.Sc.

Akademischer Mitarbeiter
Institut für Leistungselektronik und Elektrische Antriebe

Kontakt

+49 711 685 67373
+49 711 685 67378
E-Mail
Visitenkarte (VCF)

Pfaffenwaldring 47
70569 Stuttgart
Deutschland
Raum: 1.253, ETI 1

Sprechstunde

flexibel nach vorheriger Anmeldung

Publikationen

2022
1. Marx, P., Assenheimer, J., Ziegler, P., Haarer, J., Roth-Stielow, J.: Reduction of Common Mode Disturbances in Parallel Modules of Integrated Modular Motor Drives. In: IEEE (ed.) 2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia). pp. 595–600 (2022).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9806860, abstract = {Decreasing switching transition times and miniaturizing power electronic designs lead to higher electromagnetic disturbances. By synchronizing opposed switching transitions, common mode disturbances can be reduced without additional filters. This paper presents an approach to synchronize the switching transitions in parallel modules of integrated modular motor drives. Based on examinations on the parasitic impedances, switching transitions are synchronized in a proper way to ensure best results. Furthermore, the timing of the switching commands is adjusted to compensate differences in the propagation delay. The approach is validated by measurements on a test setup.}, author = {Marx, Philipp and Assenheimer, Jan and Ziegler, Philipp and Haarer, Jörg and Roth-Stielow, Jörg}, booktitle = {2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia)}, editor = {IEEE}, isbn = {978-4-8868-6425-3}, month = {05}, pages = {595-600}, title = {Reduction of Common Mode Disturbances in Parallel Modules of Integrated Modular Motor Drives}, url = {https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9806860}, year = 2022 }
  Link
  https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9806860
2. Ziegler, P., Bura, M., Haarer, J., Marx, P., Hirning, D., Roth-Stielow, J.: Optimization Approaches for the Signal Processing of Hybrid Current Sensors. In: IEEE (ed.) 2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia). pp. 506–513 (2022).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9807001, abstract = {Hybrid current sensors are suitable devices for wide bandwidth current measurement. They combine two different measurement circuits, one for DC and low-frequency current measurement and another for high frequency current measurement. This combines the advantages of different measurement principles in one current sensor. The output signal of the hybrid current sensor is generated through a superposition of the low-frequency and high-frequency current sensor. This is realized using analog signal processing by means of an analog operational amplifier circuit. The challenge is to superpose the frequency responses of the different measurement circuits achieving a constant gain in the transition area. This paper focuses on the analog signal processing and its optimization. Based on a state-of-the-art realization, two possible optimization approaches of the signal processing are presented to increase the bandwidth. These optimization approaches are investigated in a simulation model and verified by frequency response measurements of a hybrid current sensor based on tunneling magnetoresistance sensors and a Rogowski coil.}, author = {Ziegler, Philipp and Bura, Michael and Haarer, Jörg and Marx, Philipp and Hirning, David and Roth-Stielow, Jörg}, booktitle = {2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia)}, editor = {IEEE}, month = {05}, pages = {506-513}, title = {Optimization Approaches for the Signal Processing of Hybrid Current Sensors}, url = {https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9807001}, year = 2022 }
  Link
  https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9807001
3. Ziegler, P., Festerling, T., Haarer, J., Marx, P., Hirning, D., Roth-Stielow, J.: Influences of Parasitic Capacitances in Wide Bandwidth Rogowski Coils for Commutation Current Measurement. In: IEEE (ed.) 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe). pp. 1–10 (2022).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9907377, abstract = {This paper focuses on the capacitive coupling of PCB integrated Rogowski coils for commutation current measurement. It investigates the cause and the influence of parasitic capacitances on the measurement signal. It discusses the advantages of a differential winding arrangement and the reasons why shielding is not an option in this application. The parasitic capacitance of three different winding arrangements are measured and compared to a Rogowski coil approach with minimized parasitic capacitance. On the base of sensor prototypes, the influence on the measurement is investigated in a pulsed current source.}, author = {Ziegler, Philipp and Festerling, Tobias and Haarer, Jorg and Marx, Philipp and Hirning, David and Roth-Stielow, Jorg}, booktitle = {2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe)}, editor = {IEEE}, isbn = {978-9-0758-1539-9}, month = {09}, pages = {1-10}, title = {Influences of Parasitic Capacitances in Wide Bandwidth Rogowski Coils for Commutation Current Measurement}, url = {https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9907377}, year = 2022 }
  Link
  https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9907377
2021
1. Ziegler, P., Stjepandic, F., Ruthardt, J., Marx, P., Fischer, M., Roth-Stielow, J.: Wide Bandwidth Current Sensor for Characterization of High Current Power Semiconductor Modules. In: 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). pp. 1–9 (2021).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9570438, abstract = {This paper presents a current sensor for commutation current measurement of high current power semiconductor modules with a bandwidth from DC up to 240 MHz. It is integrated in the commutation path with a coaxial housing generating a specified measurement point adding a low insertion inductance of 1.8 nH. It consists of tunnel-magnetoresistance sensors for low frequency current measurement and a PCB integrated Rogowski coil for high frequency current measurement. The measurement techniques are combined using the HOKA principle. The DC current linearity, the dynamic behavior as well as the signal-to-noise ratio of the current sensor is characterized.}, author = {Ziegler, Philipp and Stjepandic, Franjo and Ruthardt, Johannes and Marx, Philipp and Fischer, Manuel and Roth-Stielow, Jörg}, booktitle = {2021 23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe)}, month = {09}, pages = {1-9}, title = {Wide Bandwidth Current Sensor for Characterization of High Current Power Semiconductor Modules}, url = {https://ieeexplore.ieee.org/document/9570438}, year = 2021 }
  Link
  https://ieeexplore.ieee.org/document/9570438
2. Ruthardt, J., Klinkhammer, A., Marx, P., Ziegler, P., Nitzsche, M., Sharma, K., Roth-Stielow, J.: Lifetime Extension of Power Semiconductor Devices by Closed-Loop Junction Temperature Control. In: 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). pp. 1–10 (2021).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{ruthardt2021lifetime, abstract = {The lifetime of power semiconductor devices is mainly affected by the thermal stress they are exposed to. Especially temperature swings damage these devices due to different coefficients of thermal expansion of the material layers inside the device. This leads to mechanical strain between these layers. This paper proposes a closed loop junction temperature control system, which is able to reduce occurring temperature swings in order to reduce the damage and to extend the expected lifetime. An online junction temperature measurement is required in order to obtain information about the real-time temperature. This is realized by measuring the temperature sensitive on-resistance of the used MOSFET. Then, the junction temperature is estimated with a calibration curve. Another requirement is the possibility to influence the junction temperature during operation. Therefore, the switching frequency is varied to affect the switching losses. This influences the junction temperature. In addition, a set-value generator is presented, which generates suitable set values to reduce temperature swings.}, author = {Ruthardt, Johannes and Klinkhammer, Arvid and Marx, Philipp and Ziegler, Philipp and Nitzsche, Maximilian and Sharma, Kanuj and Roth-Stielow, Jörg}, booktitle = {2021 23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe)}, isbn = {978-9-0758-1537-5}, month = {09}, pages = {1-10}, title = {Lifetime Extension of Power Semiconductor Devices by Closed-Loop Junction Temperature Control}, url = {https://ieeexplore.ieee.org/document/9570681}, year = 2021 }
  Link
  https://ieeexplore.ieee.org/document/9570681
3. Marx, P., Assenheimer, J., Ruthardt, J., Ziegler, P., Nitzsche, M., Fischer, M., Roth-Stielow, J.: Common Mode Voltage Cancellation in Integrated Modular Motor Drives. In: 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). p. P.1-P.9 (2021).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9570411, abstract = {Increasing switching transition slopes and miniaturizing of power electronic set-ups lead to more problems due to electromagnetic interference (EMI). This paper presents a concept to suppress the electromagnetic disturbances in modular electrical drives without using common mode filters. The usage of full bridge converters enables the synchronization of the switching transitions to suppress the emitted common mode disturbances of every single module. To evaluate the concept, the parasitic paths of a single module are investigated. With consideration of the parasitic paths, an accurate EMI model is built which identifies improvements for the cancellation concept in future applications. Finally, the concept and the simulation model are verified by measurements.}, author = {Marx, Philipp and Assenheimer, Jan and Ruthardt, Johannes and Ziegler, Philipp and Nitzsche, Maximilian and Fischer, Manuel and Roth-Stielow, Jörg}, booktitle = {2021 23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe)}, month = {09}, pages = {P.1-P.9}, title = {Common Mode Voltage Cancellation in Integrated Modular Motor Drives}, url = {https://ieeexplore.ieee.org/document/9570411}, year = 2021 }
  Link
  https://ieeexplore.ieee.org/document/9570411
2020
1. Ruthardt, J., Schnabel, L., Ziegler, P., Marx, P., Sharma, K., Fischer, M., Nitzsche, M., Roth-Stielow, J.: Closed Loop Junction Temperature Control of Power Transistors for Lifetime Extension. In: 2020 IEEE Applied Power Electronics Conference and Exposition (APEC). pp. 2955–2955. , New Orleans, USA, (2020).
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9124000, abstract = {The lifetime of power transistors significantly depends on the junction temperature swings. These temperature swings occur, for instance when the load conditions of the power electronic circuit change. In this work, a closed loop junction temperature control system is designed to increase the expected lifetime of power transistors. Therefore, the control system reduces the occurring temperature swings by influencing the power losses of the power transistor. For that, the gate driver’s supply voltage is adjusted, which affects the switching speed and the conduction characteristics. The junction temperature is measured by determination of the temperature sensitive internal gate resistance via the high-frequency gate-signalinjection method and fed back to the junction temperature controller. Both, the junction temperature measurement method and the control system are evaluated with a three-phase two-level voltage-source inverter. It is extended by a control strategy, which calculates a suitable set value for the controller in order to reduce junction temperature swings.}, address = {New Orleans, USA,}, author = {Ruthardt, Johannes and Schnabel, Lukas and Ziegler, Philipp and Marx, Philipp and Sharma, Kanuj and Fischer, Manuel and Nitzsche, Maximilian and Roth-Stielow, Jörg}, booktitle = {2020 IEEE Applied Power Electronics Conference and Exposition (APEC)}, eventdate = {15-19. March 2020}, issn = {2470-6647}, month = {03}, pages = {2955-2955}, title = {Closed Loop Junction Temperature Control of Power Transistors for Lifetime Extension}, url = {https://ieeexplore.ieee.org/document/9124000/}, year = 2020 }
  Link
  https://ieeexplore.ieee.org/document/9124000/
2019
1. Zehelein, M., Portik, J., Nitzsche, M., Marx, P., Roth-Stielow, J.: Reduction of the Leakage Currents by Switching Transition Synchronization for a Four-Switch Buck-Boost Converter. In: 2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia). pp. 2217–2223. IEEE (2019).
  - BibTeX
  BibTeX
  @inproceedings{8796950, abstract = {Wide-bandgap transistors are operated at much higher switching transition voltage slopes and current slopes compared to silicon power transistors. For the design of new power electronic devices compactness is a main focus, which increases parasitic capacitances of the device. This trend leads to significantly higher common and differential mode distortions especially at high frequency ranges. To overcome this drawback, efficient filter techniques for these distortions are necessary. This paper focuses on the leakage current reduction in four switch buck-boost converter topologies by synchronizing the switching transitions of the buck and boost stage to achieve a leakage current cancellation. By designing two similar leakage current paths and using destructive interference of two inversely excited leakage currents, the overall leakage current at the heat sink of the device is decreased. This study investigates the effectiveness of the leakage current reduction depending on different operating points for buck and boost operation.}, author = {Zehelein, Matthias and Portik, Julian and Nitzsche, Maximilian and Marx, Philipp and Roth-Stielow, Jörg}, booktitle = {2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia)}, eventdate = {27-30 May 2019}, month = {05}, organization = {IEEE}, pages = {2217-2223}, title = {Reduction of the Leakage Currents by Switching Transition Synchronization for a Four-Switch Buck-Boost Converter}, year = 2019 }
2. Ruthardt, J., Muñoz Barón, K., Marx, P., Sharma, K., Nitzsche, M., Fischer, M., Roth-Stielow, J.: Online Junction Temperature Measurement via Internal Gate Resistance Using the High Frequency Gate Signal Injection Method. In: PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. pp. 1–7. VDE Verlag (2019).
  - BibTeX
  BibTeX
  @inproceedings{8767601, abstract = {In many power electronic applications, it is important to monitor the junction temperature of the power semiconductor devices. This enables for example an abnormal temperature protection, lifetime monitoring or junction temperature control. This paper proposes an online junction temperature measurement based on the internal gate resistance as a temperature sensitive electrical parameter. A direct measurement of this resistance is not possible. Therefore, a high frequency signal is injected into the gate circuit to measure the gate circuit's impedance, which includes the temperature sensitive internal gate resistance. This paper focuses on a simple realization of this method.}, author = {Ruthardt, Johannes and Muñoz Barón, Kevin and Marx, Philipp and Sharma, Kanuj and Nitzsche, Maximilian and Fischer, Manuel and Roth-Stielow, Jörg}, booktitle = {PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management}, eventdate = {7. - 9. Mai 2019}, isbn = {978-3-8007-4938-6}, language = {English}, month = {05}, pages = {1-7}, publisher = {VDE Verlag}, title = {Online Junction Temperature Measurement via Internal Gate Resistance Using the High Frequency Gate Signal Injection Method}, year = 2019 }

Lehre

Übungen: Regelungstechnik II

ORCID

orcid.org/0000-0002-6707-5846

Philipp Marx, M.Sc.

Kontakt

Sprechstunde

Publikationen

2022

BibTeX

Link

BibTeX

Link

BibTeX

Link

2021

BibTeX

Link

BibTeX

Link

BibTeX

Link

2020

BibTeX

Link

2019

BibTeX

BibTeX

Lehre

ORCID

Zielgruppe

Formalia

Services

Organisation

Philipp Marx, M.Sc.

Kontakt

Sprechstunde

Publikationen

2022

BibTeX

Link

BibTeX

Link

BibTeX

Link

2021

BibTeX

Link

BibTeX

Link

BibTeX

Link

2020

BibTeX

Link

2019

BibTeX

BibTeX

Lehre

ORCID

So erreichen Sie uns

Zielgruppe

Formalia

Services

Organisation